Showing posts with label Doepke. Show all posts
Showing posts with label Doepke. Show all posts

Thursday, November 10, 2016

Some Rare Toys from Another ebay Seller

Thursday, November 10, 2016
Sunny with clouds
9 Celsius / 48 Fahrenheit



Some Rare Toys from
Another ebay Seller


I've been using an ebay affiliated website called picclick. Picclick has all of the toys on ebay, but presents the toys through a search. The site is well-organized and easy to work with. Yestersday, I came across the Doepke Adams road grader, and decided to investigate. I clicked on one of the commands, and I was redirected to bbrsales on ebay. There was an excellent collection of toys, and some of them I had not seen before. I wrote to the owner of the ebay store, and got the permission to use the photos, and write about the store. bbrsales has an excellent record on  ebay, and sells a fair amount of rarer and different toys. 

Vintage Doepke Model Toys Adams Road Grader
Circa late 1940's-Early 1950's in excellent condition considering its' age.
These toys were meant to last, and were made of pressed steel.
Length:  26"  (660mm)

When I started to write about toys, I used to buy and resell them on  ebay.  I've had several Doepke toys, and they were made very well and have endured over time!



Rare Antique Orobr German  Tin Litho Wind Up Double Decker Bus
Early 1900's with a wind-up mechanism.  When wound up, the bus moves forward. 
The wheels are moveable, allowing the toy to go in circles.
 6" x 2 1/2" x  3 1/2"   (152 mm x 65 mm x 88 mm)

The Orobr toy is certainly in great condition, considering that it is 100 years old  and more.
WHat shows here is the fact that the European toys were more sophisticated in terms of lithography on the sides of the toy. At that time, many of the American toys were cast iron or pressed steel toys.
Vintage Marx Wind-Up Pressed Steel Large Reversible  Coupe Car
The wind-up motor is done with a key that winds up a spring. The car features front and rear bumpers. When the coupe hits something, it reverses direction.
L x W x H:  16" x 4" x 3 1/2" (406 mm x 101 mm x 89 mm)

Once again, here's a you in quite good condition. Marx was an American toy company that was highly successful. At one time, Lousi Marx;s company was producing nearly 1 in 3 toys in the USA.
Original Vintage 1920's Keystone Packard Pump Engine Fire Truck.
This is a push toy with a working steering wheel that allows the truck 
to go straight or in circles.  Pressed steel with rubber tires.
The truck is very large, and measures 28" (711 mm)

The Keystone company started out in the photography business, and developed  toys later on.
I've never seen this Keystone truck before, and it certainly is quite sophisticated with its' bell, siren, tank, and hose reel.



Scarce Vintage Structo Pressed Steel Dump Truck with Headlights.
Early 1930's pressed steel dump truck. 
Headlights are battery-operated, and the on/off switch was professionally after-market.
L x W x H:  17 1/2" x 6" x 5 1/2"  (444 mm x 152 mm x 140 mm

Here again is an old toy (Structo) that is in very good condition considering that its' 80-85 years old. 
These toys were made for the outdoors, and were built quite well. The Structo Company was founded in  1908 in Freeport, Illinois (USA) and was originally known as the  Thompson Manufacturing Company. The name was changed to the Structo Company in 1911. The name "Structo" was a play on words based on the word indestructible. *

*http://www.antiquetoyworld.com/shows/structo-toys-100-years/

I hope you enjoyed looking at these toys, and you can venture over to bbrsales, 
by clicking the link under the company logo at the top of the page. 

Thamks for dropping by,
and as always,
Have a great part of the day or night,
Wherever you may be.

Stacey Bindman
toysearcher@gmail.com












Tuesday, February 11, 2014

A Doepke Caterpillar Bulldozer from Exceptional Toy Train Specialists

Tuesday, February 11, 2014
               (Still cold, but sunny)



A Doepke Caterpillar Bulldozer
from  Exceptional Toy Train Specialists

   I've had Doepke on my mind lately. The reason for this is that I've been adding material to several of my Facebook pages and my Linkedin account. I've been using my own Doepke toy photos and improving them in Photoshop. They're fantastic toys that were made to be played with and to last! I made my usual request to someone on ebay to use their Doepke bulldozer photos, but decided not to wait. So I went to Liveauctioneers, and there before me, were once photos from Ambrose Bauer.

Paul V. Ambrose and  Drew J. Bauer are the owners of Ambrose Bauer trains. If you rare ever looking to buy model trains or want to know about trains this is one of the finest resources to go to. But their "piece de resistance" (The best item in a series ) is their fine photography with large-sized images. I haven;t written about them lately, but I will.

  What's interesting for today is that I found a very nice Doepke Caterpillar D6 tractor at a Train auctioneer. They do periodically have other items besides trains, but I'm always visiting for their trains.

   Doepke was a great pressed steel company that made rugged and hands-on toys. I know, because I purchased several of them, and I played with them "a bit". It's embarrassing to admit that a grown man would try these toys out in his house! Of course in writing a blog, you can;'t see me turning red. These toys are big and heavy. This Doepke Caterpillar Yellow D6 Cat is almost 15" long (381 mm), and weighs between 5-6 pounds  (2.27-2.72 kg).













So today's post was like looking for something  that you misplaced in your house,
 and finding something even more astounding that was also lost!

Thanks for dropping by,
and have a great part of the day,
wherever you may be.
Stacey
write to meantime at
toysearcher@gmail.com

Wednesday, January 19, 2011

The Doepke Sand Movers

January 19,2011
Third Blog of the day

Some of my more favourite (favorite, for American spelling) toys are the Doepke Barber-Greene bucket loader and the  Doepke Barber-Greene track loader. These were made in the late 1940's and early 1950's, and you can find information on the Doepke toy company by doing a search with any search engine.
Photo 1


Photo 2
Photo 3

Photo 4

The 4 images above are of the Doepke Barber-Greene track loader.  This toy is about 14" (L) x 5" (W) x 12" (H) and weights about 3 pounds. It was a substantial toy for its' times and cost about $ 13.00, also a lot of money for  a toy ,for a period just after WWII.

The top 2 images illustrate the movements of the item. This toy was meant to play with in the sand. The crank on the side turns 2 augers (earth churners) that push dirt into the small buckets. These move again, from the turning motion, and then drop on to a conveyor belt. The conveyor belt also moves, and then "dumps" its' load into a dump truck (Not shown of course) that would be positioned under the end of the belt.

I'm not sure which of the 2 Barber-Greene toys came first or if they both were released at the same time, but the other toy can be seem below. It's also substantial, and very mechanical - a great hands-on toy to play with.







The Doepke Barber-Greene Track Loader came in 2 colours - green and orange. The last photo, immediately above, shows the 2 sand-churning augers at either side of the small bucket.

Photographic Lighting for Toys

January 19, 2011 
Blog # 2


I've never created a blog or blogged, so I might as well go all out and add a second article today. It will be all about photographic lighting, although in this blog related to toys.

I taught pro photography for close to 32 years, and the change from film to digital was humongous! I was a purist film person, but now, I would never dream of going back to film. Digital truly is a revolutionary invention that has remarkably changed mankind forever.

If you look closely at the above stagecoach image, you'll see 2 shadows, which are from 2 lights. I use a brand of light called LTM, but even the sun and a reflector will do.

There are usually at least  2 lights used in photography. The main light create the direction from where the light is coming from, and also create 3d (form) or shape (2-D or silhouette).

The fill light adds light into dark area of the photo that the main light does not hit. In doing so, detail is shown in these areas. Don't worry if you're not catching on yet. I  will add much more detail and explanations in the future, so that you will better understand this important topic.

The fill light is positioned high, and can be softened ( with diffusion material), so that its' shadows do not conflict with the shadows of the main light. The fill light is also weaker than the main, so that shadows still exist, but the detail is seem much better.

In the stagecoach image, I've labelled the 2 lights by their shadows, so that you will know that 2 lights were used.


You can see 2 shadows for this item  of a horse and a seated racer called a "sulky". What is important when using multiple lights is to make sure that the fill or any other light (non-main) does not present its' shadow too boldly. The reason for this is that we live on a planet with only 1 light source - the sun, hence, artificial lighting must also follow that course or "rule".

Here's another image below.


The lighting  in these 3 images all are the same. The reason for this is that I sell antique and vintage toys on E-Bay, so it's convenient for me to use the same lighting , which is set up in part of my house.The main light is positioned at about 11:00 o'clock, while the fill light is positioned at about 7:00 o'clock and very high. Positioning the fill light high allows its' shadow to fall behind the subjects and be hidden. This then allows the main light's shadow to be most prominent.

The Search Starts

January, 19,2011

Hello everyone

Welcome to a new blog on antiques. I just retired, and by a chance of luck came upon almost unused (2) sets of Meccano . For those who don't know, these are what are called "erector sets". The old antique sets were made of metal, and the nature of the toys was to construct. They were invented in Great Britain, and geared towards the young, although today, many "young-of-mind" collectors search out these items.  The sets came with various lengths and shapes of metal, various colors, nuts and bolts and small tools to have the pieces join.





You can imagine how elated I was when I came across these sets. Below is the other set.








These 2 sets were produced in the 40's and 50's. Their red and blue piece colours identify them from that era. Anyway, someone found these here in Montreal, I purchased them, and then e-mailed a few people from a Meccano club in England to check out the demand. 1 person eventually bought the item, and it now has come back to reside, actually in Ireland.