Thursday, August 9, 2012

Tom Sanders to the Rescue (Again)

August 9, 2012
Another Hot & Sunny Day


Tom Sanders to the Rescue 
(Again)

   I already had Tom help me out with a previous guest instalment on this blog. A few days ago, I looked in my G-mail mailbox, and there was an e-mail from Tom with another instalment! Normally,I use my Hotmail account for e-mails, so this was a great surprise.  As you know, I'm trying to sell off all of my toys and wait again for the fall, when more people are interested in buying toys. Of course, I couldn't resist a good deal, and I purchased 2 Tootsietoy Grahams.

So here's Tom Sanders again with his presentation.

Stacey,

Just in case, here is another segment of, "What did you do to that toy?!!" ....

This time it’s a tale of two Tootsie Toy Trucks. One, was custom built by a past employee of Tootsie Toy and overhauled later by me. The second is the result of having a "busted-up" Tootsie Cement Mixer.

As per my norm, I struggle with the machinations and semantics of whether to restore to stock configuration or go beyond and overhaul the item. With these two trucks, technically, I did both...

The Mack B Pure Oil Tanker-  I live within an hour's drive of downtown Chicago the home base city of Tootsie Toy. Having friends who regularly scour the garage sales, auctions and re-sell shops in the Chicago area, I occasionally receive goodies to ponder. The story behind this Pure Oil Tanker was that it was modified originally by an employee of the Dowst Bros (Tootsie Toy) and was mostly in the machine shops. He would take the "seconds" to work up various concepts to show the marketing folks. I now have about 20 of these and over time will rebuild them for display. In this project, I simply took the bits and pieces in the box and restored it to his finished vision and not just another Tootsie Toy Tanker.


Photo Courtesy of Mr. Tom Sanders (Copyright 2012)
Please Do Not Copy Without the Permission of the Author


   Photo Courtesy of Mr. Tom Sanders (Copyright 2012)
Please do Not Copy Without the Permission of the Author

  Photo Courtesy of Mr. Tom Sanders (Copyright 2012)
Please do Not Copy Without the Permission off the Author

On the second, as stated earlier, I was given a basket case Mack Cement Mixer with the challenge (and bet for Tex-Mex) that the truck would never be whole again. With those loose parameters, I decided to go full overhaul and transform the truck into something completely different. This ended up being quite a challenge until I started scaling some measurements from a "Thermodyne" version seen at a truck show. That truck featured a sleeper cab and chassis and the sleeper intrigued me as that could cover the "engine" that powered the cement barrel. More dimensions, a game plan for surgery and then a sub-frame was what was needed to get to this point shown in the pictures.

 Photo Courtesy of Mr. Tom Sanders (Copyright 2012)
Please do Not Copy Without the Permission of the Author


Surgery was severe. The parts laid out along the cab in picture give some clue. The removal of various pieces to create "the look" of a semi meant that structural integrity would be compromised. To counter this issue I built a sub-frame chassis using rectangular brass tube and constructed it similar to that of a race truck. The back and side edges the steps (into the cab) were used as strongpoints for assuring the cab would remain integral with the aft section. To hide this, I built fuel tanks on both sides to contain these fixed points. the sleeper dog house was made based on models using an index card cut and folded to shape. Thin wall steel was used as smooth bends were paramount to minimize any body fillers. All seams were soldered and sanded. The sleeper was compressed onto the truck with liberal JB Weld to handle security.  A little body filler to cover the cab and sleeper seams was added and sanded when dry.


 Photo Courtesy of Mr. Tom Sanders (Copyright 2012)
Please do Not Copy Without the Permission of the Author

 Photo Courtesy of Mr. Tom Sanders (Copyright 2012)
Please do Not Copy Without the Permission of the Author

Photo Courtesy of Mr. Tom Sanders (Copyright 2012)
Please do Not Copy Without the Permission of the Author


Until I hand build a more modern length trailer, I decided that setting up a tandem trailer assembly made sense. The concept is in place and even a mock-up has been constructed. Tootsie actually helped on this as the bogies on the trailers includes a rectangular cavity top center which will allow me to create a simple rear trailer hook-up for the trailing bogie.

This truck is not finished. Note that one exhaust stack (passenger side) still has tape on it so I know what side it ends up on. The wheels and axles are not set as well as I am considering various paint schemes. I did give it a paint job for basic display and I will update as I proceed.  My challenger has already conceded and last week I enjoyed the Mex and a Margarita!

Best Regards,
Tom Sanders
SANDMAN OVERHAUL


As always, thanks to everyone for dropping by,

and have a great morning, afternoon, or evening, 
wherever you may be.


  Tom Sander's website can be found at:

 https://sites.google.com/site/sandmanoverhaul/home







No comments:

Post a Comment